Extreme Networks Summit1 manual Messages and higher are displayed

		STATUS MONITORING
Table 12-1:Switch Monitoring Commands (continued)
Command	Description
show ipmc cache {<group>	Displays the IP multicast route table. Information
{<src_ipaddress> <mask>}} all}	displayed includes the following:
	■	IP group address
	■ IP source address and mask
	■	Upstream neighbor
	■ Interface to upstream neighbor
	■	Route expiration timer
	■	Routing protocol
	■ List of next hop interfaces and protocols
show ipqos {<ip_destination_address>	Displays the IP QoS table.
<mask> all}

show iproute vlan {<name> all permanent <ipaddress> <mask>}

Displays the contents of the IP routing table.

show ipstats {vlan [<name> all]}	Displays statistics of packets handled by the CPU,
	including the following:
	■	inpackets, outpackets
	■	ICMP/IGMP statistics
	■	IRDP statistics
show log {<priority>} {<subsystem>}	Displays the current snapshot of the log. Options
	include:
	■ priority — Filters the log to display message
		with the selected priority or higher (more critical).
		Priorities include critical, warning, and
		informational. If not specified, informational priority
		messages and higher are displayed.
	■ subsystem — Filters the log to display
		messages associated with the selected switch
		subsystem. Subsystems include Syst, STP Brdg,
		SNMP, Telnet, VLAN, and Port. If not specified,
		all subsystems are displayed.
show log config	Displays the log configuration, including the syslog
	host IP address, the priority level of messages being

logged locally, and the priority level of messages being sent to the syslog host.

SUMMIT SWITCH INSTALLATION AND USER GUIDE 12-3