
CONFIGURING PORTS
Table 4-1: Port Commands (continued)
Command | Description | |
|
| |
disable smartredundancy <portlist> | Disables the smart redundancy feature. If the | |
| feature is disabled, the switch changes the | |
| active link only when the current active link | |
| becomes inoperable. | |
show port {<portlist>} collisions | Displays | |
show port {<portlist>} config | Displays the port configuration, including the | |
| following: | |
| ■ | Port state |
| ■ | Link state |
| ■ | Link speed |
| ■ | Duplex mode |
| ■ | Flow control |
| ■ | Load sharing information |
| ■ | Link media information |
show port {<portlist>} information | Displays detailed | |
| including the following: | |
| ■ | Port state |
| ■ | Link state |
| ■ | Autonegotiation state |
| ■ | Link speed |
| ■ | Duplex mode |
| ■ | Load sharing information |
| ■ | EDP status |
| ■ | SummitLink mode status |
| ■ | VLAN information |
| ■ | QoS information |
show port {<portlist>} packet | Displays a histogram of packet statistics. | |
show port {<portlist>} qosmonitor | Displays | |
| information on QoS, refer to Chapter 8. | |
show port {<portlist>} rxerrors | Displays | |
| more information on error statistics, refer to | |
| Chapter 12. | |
show port {<portlist>} stats | Displays | |
| information on port statistics, refer to Chapter 12. | |
|
|
|
SUMMIT SWITCH INSTALLATION AND USER GUIDE |