
VIRTUAL LANS (VLANS)
•Tagged/untagged status for each port
•How the ports were added to the VLAN (manually or by GVRP)
To display protocol information, use the following command:
show protocol {<protocol> all}
This show command displays protocol information, including the following:
•Protocol name
•List of protocol fields
•VLANs that use the protocol
DELETING VLANS
To delete a VLAN, or to return VLAN settings to their defaults, use the commands listed in Table
Table 5-3: VLAN Delete and Reset Commands
Command | Description |
disable
delete protocol <protocol>
Allows a VLAN to use STP port information. Resets the IP address of the VLAN. Removes a VLAN.
Removes a protocol.
SUMMIT SWITCH INSTALLATION AND USER GUIDE |