Extreme Networks Summit1 manual 3Common Commands, Command Description

ACCESSING THE SWITCH

COMMON COMMANDS

Table 3-3describes common commands used to manage the switch. Commands specific to a particular feature are described in the other chapters of this guide.

Table 3-3:Common Commands

Command	Description
create account [admin user] <username>	Creates a user account.
{<password>}
create vlan <name>	Creates a VLAN.
config account <username> {<password>}	Configures a user account password.
config banner	Configures the banner string. You can
	enter up to 24 rows of 80-column text that
	is displayed before the login prompt of
	each session. Press [Return] at the
	beginning of a line to terminate the
	command and apply the banner. To clear
	the banner, press [Return] at the beginning
	of the first line.

config devicemode [bridging iprouting ipmc ipqos]

config port <portlist> auto off {speed [10 100]} duplex [half full]

Configures the operating mode of the switch. Specify the following:

■bridging — Layer 2 bridging functions only

■iprouting — Bridging and IP unicast routing functions

■ipmc — Bridging, IP unicast routing, and IP multicast routing functions

■ipqos — IP flow-based QoS functions

If this command is used to change the operating mode of the Summit once it is up and running, it causes the switch to save the configuration and reboot. The default operating mode is ipmc.

Manually configures the port speed and duplex setting of one or more ports.

3-6 SUMMIT SWITCH INSTALLATION AND USER GUIDE