DISPLAYING VLAN SETTINGS
DISPLAYING VLAN SETTINGS
To display VLAN settings, use the following command:
show vlan {<name> all}
Sample output from this command is as follows:
show vlan all
VLAN Interface
Tagging: | Untagged | (Internal | tag 4095) |
|
|
| ||||||
IP: | Not configured |
|
|
|
|
|
|
|
| |||
STPD: | Domain “s0” is running spanning tree protocol. | |||||||||||
Protocol | AppleTalk | = | SNAP:809b | SNAP:80f3 |
|
| ||||||
QoS Profile: |
| QP1 |
|
|
|
|
|
|
|
|
| |
Ports: | 4. | (Number | of | active | port=4) |
|
| |||||
| Untag: |
| 1 | 2 | 3 | 10 |
|
|
|
|
| |
LAN Interface | ||||||||||||
Tagging: | 802.1Q | Tag 1054 |
|
|
|
|
|
|
|
| ||
IP: | 123.45.67.1/255.0.0.0 |
|
|
|
|
|
| |||||
STPD: | Domain “s0” is running spanning tree protocol. | |||||||||||
Protocol | Match | all | unfiltered | protocols. |
|
| ||||||
QoS Profile: |
| QP1 |
|
|
|
|
|
|
|
|
| |
Ports: | 18. |
| (Number of | active | port=6) |
| ||||||
| Untag: |
| 1 | 2 | 3 | 4 | 5 | 8 | 9 | 10 |
|
|
| Tagged: | 6 | 7 | 11 12 | 13 | 14 | 15 | 16 | 17 | 18 | ||
The show command displays summary information about each VLAN, and includes the following:
•Name
•VLANid
•How the VLAN was created (manually or by GVRP)
•IP address
•STPD information
•Protocol information
•QOS profile information
•Ports assigned
SUMMIT SWITCH INSTALLATION AND USER GUIDE |
