Extreme Networks Summit1 manual Do a GET When Configuring a Vlan

USING EXTREMEWARE VISTA

•Click the Logout tab.

If you attempt to log out without saving your changes, ExtremeWare Vista prompts you to save your changes.

If you select Yes, the changes are saved to the selected configuration area. To change the selected configuration area, you must go to the Configuration task tab, Switch option.

DO A GET WHEN CONFIGURING A VLAN

When configuring a VLAN using ExtremeWare Vista, prior to editing the VLAN configuration you must first click on the get button to ensure that subsequent edits are applied to the correct VLAN. If you do not click on the get button and you submit the changes, the changes will be made to the VLAN that was previously displayed.

If you configure a VLAN and then delete it, the Default VLAN is shown in the VLAN name window, but the VLAN information contained in the lower portion of the page is not updated. Click on the get button to update the display.

SENDING SCREEN OUTPUT TO EXTREME NETWORKS

If Extreme Networks requests that you e-mail the output of a particular ExtremeWare Vista screen, do the following:

1Click on the content frame of the screen that you must send.

2From Netscape Navigator, select Save Frame As from the File menu, and enter a name for the file.

3From Microsoft Internet Explorer, select Save As File from the File menu, and enter a name for the file.

4Attach the file to the e-mail message that you are sending to Extreme Networks.

13-6 SUMMIT SWITCH INSTALLATION AND USER GUIDE