Cisco Systems A9014CFD manual Boundary ,...,boundary -Lists upper, 11-8

Chapter 11 ITU-T Y.1731 Performance Monitoring

How to Configure ITU-T Y.1731 Performance Monitoring

	Command	Purpose
Step 6
	distribution {delay delay-variation}{one-way	(Optional) Specifies measurement type and
	two-way}number-of-bins boundary[,...,boundary]	configures bins for statistics distributions kept.
	Example:	• delay—Specifies that the performance
			measurement type is delay. This is the default
	Router(config-sla-y1731-delay)# distribution		value, along with delay variation.
	delay-variation two-way 5 5000, 10000,15000,20000,-1	• delay-variation—Specifies that the performance
			measurement type is delay variation. This is the
			default value, along with delay.
		• one-way—Specifies one-way measurement
			values. This is the default for a dual-ended
			operation.
		• two-way—Specifies two-way measurement
			values. This is the default for a single-ended
			operation.
		• number-of-bins—Specifies the number of bins
			kept during an aggregate interval. The range is
			from 1 to 10. The default is 10.
		•	boundary [,...,boundary]—Lists upper
			boundaries for bins in microseconds. Minimum
			number of boundaries required is one. Maximum
			allowed value for the uppermost boundary is -1
			microsecond. Multiple values must be separated
			by a comma (,). The default value is
			5000,10000,15000,20000,25000,30000,35000,4
			0000,45000, -1.
Step 7
	frame interval milliseconds	(Optional) Sets the gap between successive frames.
		• milliseconds—Specifies the length of time in
	Example:		milliseconds (ms) between successive synthetic
	Router(config-sla-y1731-delay)# frame interval 100		frames. The range is from 100 to 10000. The
			default is 1000.
Step 8
	frame offset offset-value	(Optional) Sets a value for calculating delay variation
		values.
	Example:	• offset-value—The range is from 1 to 10. The
	Router(config-sla-y1731-delay)# frame offset 1		default is 1.
Step 9
	frame size bytes	(Optional) Configures padding size for frames.
		• bytes—Specifies the padding size, in four-octet
	Example:		increments, for the synthetic frames. The range is
	Router(config-sla-y1731-delay)# frame size 32		from 64 to 384. The default is 64.
Step 10
	history interval intervals-stored	(Optional) Sets the number of statistics distributions
		kept during the lifetime of an IP SLAs Ethernet
	Example:	operation.
	Router(config-sla-y1731-delay)# history interval 2	•	intervals-stored—Specifies the number of
			statistics distributions. The range is from 1 to 10.
			The default is 2.

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
11-8	OL-23826-09