Cisco Systems A9014CFD manual 22-36, Delay-req interval interval

Chapter 22 Configuring Clocking

Configuring PTP for the Cisco ASR 901 Router

	Command	Purpose
Step 8	delay-req interval interval	(Optional) Configures the minimum interval allowed
		between PTP delay request messages.
	Example:	The intervals are set using log base 2 values, as follows:
	Router(config-ptp-port)# delay-req	• 5—1 packet every 32 seconds
	interval 1
		• 4—1 packet every 16 seconds
		• 3—1 packet every 8 seconds
		• 2—1 packet every 4 seconds
		• 1—1 packet every 2 seconds
		• 0—1 packet every second
		• -1—1 packet every 1/2 second, or 2 packets per second
		• -2—1 packet every 1/4 second, or 4 packets per second
		• -3—1 packet every 1/8 second, or 8 packets per second
		• -4—1 packet every 1/16 seconds, or 16 packets per
		second.
		• -5—1 packet every 1/32 seconds, or 32 packets per
		second.
		• -6—1 packet every 1/64 seconds, or 64 packets per
		second.
		• -7—1 packet every 1/128 seconds, or 128 packets per
		second.
		The default is -6.
Step 9	sync interval interval	(Optional) Specifies the interval used to send PTP
		synchronization messages. The intervals are set using log
	Example:	base 2 values. The Cisco ASR 901 router supports the
		following values:
	Router(config-ptp-port)# sync
	interval -5	• -5—1 packet every 1/32 seconds, or 32 packets per
		second.
		• -6—1 packet every 1/64 seconds, or 64 packets per
		second.
		The default is -6.
Step 10	end	Exits clock port configuration mode and enters privileged
		EXEC mode.
	Example:
	Router(config-ptp-port)# end

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
22-36	OL-23826-09