Cisco Systems A9014CFD Threshold high high-seconds none low, Low-seconds window milliseconds

Chapter 10 Configuring Ethernet OAM

	Command	Purpose
Step 6
	ethernet oam link-monitor frame-period	(Optional) Configure high and low thresholds for the
	{threshold {high {high-framesnone} low	error-frame period that triggers an error-frame-period link
	{low-frames}} window frames}	event.
		• Enter the threshold high high-framescommand to set
		a high threshold in number of frames. The range is 1 to
		65535. You must enter a high threshold.
		• Enter the threshold high none command to disable the
		high threshold.
		• Enter the threshold low low-framescommand to set a
		low threshold in number of frames. The range is 0 to
		65535. The default is 1.
		• Enter the window frames command to set the a polling
		window size in number of frames. The range is 1 to
		65535; each value is a multiple of 10000 frames. The
		default is 1000.
Step 7
	ethernet oam link-monitor frame-seconds	(Optional) Configure frame-seconds high and low
	{threshold {high {high-secondsnone} low	thresholds for triggering an error-frame-seconds link event.
	{low-seconds}} window milliseconds}	• Enter the threshold high high-secondscommand to
		set a high threshold in number of seconds. The range is
		1 to 900. You must enter a high threshold.
		• Enter the threshold high none command to disable the
		high threshold.
		• Enter the threshold low low-framescommand to set a
		low threshold in number of frames. The range is 1 to
		900. The default is 1.
		• Enter the window frames command to set the a polling
		window size in number of frames. The range is 100 to
		9000; each value is a multiple of 100 milliseconds. The
		default is 1000.
Step 8
	ethernet oam link-monitor high threshold action	(Optional) Configure the router to move an interface to the
	error-disable-interface	error disabled state when a high threshold for an error is
		exceeded.
Step 9
	exit	Return to global configuration mode.
Step 10
	interface interface-id	Define an Ethernet OAM interface, and enter interface
		configuration mode.
Step 11
	source-template template-name	Associate the template to apply the configured options to
		the interface.
Step 12
	end	Return to privileged EXEC mode.
Step 13
	show ethernet oam status [interface interface-id]	Verify the configuration.
Step 14
	copy running-config startup-config	(Optional) Save your entries in the configuration file.

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
10-44	OL-23826-09