Cisco Systems A9014CFD manual Scheduling IP SLAs Operations, Prerequisites, 11-14

Chapter 11 ITU-T Y.1731 Performance Monitoring

How to Configure ITU-T Y.1731 Performance Monitoring

	Command	Purpose
		• threshold-type immediate—(Optional) When a
		threshold violation for the monitored element is
		met, immediately perform the action defined by
		the action-typekeyword.
		• threshold-value upper-threshold
		lower-threshold—(Optional) Specifies the
		upper-threshold and lower-threshold values of
		the applicable monitored elements.
Step 16
	ip sla logging traps	(Optional) Enables IP SLAs syslog messages from
		CISCO-RTTMON-MIB.
	Example:
	Router(config)# ip sla logging traps
Step 17
	exit	Exits global configuration mode and enters privileged
		EXEC mode.
	Example:
	Router(config)# exit

What to Do Next

After configuring this MEP, see the Scheduling IP SLAs Operations, page 11-14to schedule the operation.

Scheduling IP SLAs Operations

Complete the following steps to schedule an IP SLAs operation.

Prerequisites

•All IP SLAs operations to be scheduled must be already configured.

•The frequency of all operations scheduled in a multi-operation group must be the same.

•List of one or more operation ID numbers to be added to a multi-operation group is limited to a maximum of 125 characters, including commas (,).

SUMMARY STEPS

1.enable

2.configure terminal

3.Do one of the following:

–ip sla schedule operation-number[life {forever seconds}] [start-time {hh : mm[:ss] [month

day day month] pending now after hh : mm : ss}] [ageout seconds] [recurring]

–ip sla group schedule group-operation-number operation-id-numbers schedule-periodschedule-period-range [ageout seconds] [frequency group-operation-frequency] [life{forever seconds}] [start-time{hh:mm[:ss] [month day day month] pending now after hh:mm:ss}]

4.exit

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
11-14	OL-23826-09