Cisco Systems A9014CFD manual 42-17, Router# show ipv6 pim topology route-count

Chapter 42 IPv6 Multicast

Configuring IPv6 Multicast

SM SPT UP: 04:27:20 JP: Join(never) Flags: KAT(00:01:04) AA PA RA SR

RPF: Vlan47,47::1:1:3*

FastEthernet4/10 04:27:16 fwd Join(00:03:14)

Tunnel0 04:27:17 fwd

To display the count of the ranges, (*, G), (S, G) and (S, G) RPT routes in the pim topology tables, use the show command described in the following example.

Router# show ipv6 pim topology route-count

PIM TT Summary

No. of group ranges = 47

No. of (*,G) routes = 7

No. of (S,G) routes = 1

No. of (S,G)RPT routes = 0

To display the IP multicast group mapping table, use the show command described in the following example. It shows group to mode mapping and RP information in case of sparse-mode groups.

Router# show ipv6 pim group-map FF0E::E0:1:1:1

FF00::/8*

RP : 51::1:1:2

Protocol: SM

Client : config

Groups : 1

Info : RPF: Tu1,51::1:1:2 (us)

To display the IPv6 multicast range-lists on a per client (config/autorp/BSR) and per mode (SSM/SM/DM/ Bidir) basis, use the show command described in the following example.

Router# show ipv6 pim range-list

Static SSM Exp: never Learnt from : ::

FF33::/32 Up: 1d16h

FF34::/32 Up: 1d16h

FF35::/32 Up: 1d16h

FF36::/32 Up: 1d16h

FF37::/32 Up: 1d16h

FF38::/32 Up: 1d16h

FF39::/32 Up:	1d16h
FF3A::/32 Up:	1d16h
FF3B::/32 Up:	1d16h
FF3C::/32 Up:	1d16h
FF3D::/32 Up:	1d16h
FF3E::/32 Up:	1d16h
FF3F::/32 Up:	1d16h
BSR SM RP: 3::3	Exp: 00:02:03 Learnt from : 2::2
FF00::/8 Up: 13:14:05

BSR SM RP: 4::4 Exp: 00:02:03 Learnt from : 2::2

FF00::/8 Up: 13:13:03

To display information about the PIM register encapsulation and decapsulation tunnels, use the show command described in the following example.

Router# show ipv6 pim tunnel

Tunnel0*
Type	: PIM Encap
RP	: Embedded RP Tunnel
Source: 1::1
	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09		42-17