Cisco Systems A9014CFD manual Enable Configure terminal, 38-3

Chapter 38 Storm Control

Configuring Storm Control

SUMMARY STEPS

1.enable

2.configure terminal

3.interface type number

4.storm-control {action {shutdown trap} {broadcast multicast unicast} {level {level bps bps-levelpps pps-level}}

5.end

DETAILED STEPS

	Command	Purpose
Step 1	enable	Enables privileged EXEC mode.
		• Enter your password if prompted.
	Example:
	Router> enable
Step 2	configure terminal	Enters global configuration mode.
	Example:
	Router# configure terminal
Step 3	interface type number	Specifies an interface type and number, and enters interface
		configuration mode.
	Example:
	Router(config)# interface
	gigabitethernet 0/1

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09		38-3