What are the common configurations for SIRIUS/DBS Signal Combiner/Splitter installation?

The common configurations include installing it nearest to the receiver/tuner where you will be using your SIRIUS receiver.

Can there be any device between the SIRIUS/DBS Combiner and the Splitter?

No, there cannot be any device between the SIRIUS/DBS Combiner and the Splitter.

How do I determine where to install the SIRIUS/DBS Signal Splitter/Combiner in my system?

Refer to the illustrations and guidelines provided in the installation guide to determine the installation location.

Configuration Considerations | Sirius Satellite Radio SR-100C

Configuration Considerations

There are differing configurations which may be found in satellite TV systems. You should determine your overall configuration, and where you will be installing

the SIRIUS/DBS Signal Combiner/Splitter in
your configuration before proceeding with the
installation. Generally, you’ll want to install it
nearest to the receiver/tuner where you will be
using your SIRIUS receiver.
A simple configuration using the SIRIUS/DBS		COMBINER
Signal Splitter/Combiner might look like the
illustration shown to the right.
Other installations (shown below and on the
next page) all follow the same guideline, that
there cannot be any device between the		SPLITTER
SIRIUS/DBS Combiner and the Splitter. Refer	IRD	SIRIUS
to these illustrations to determine where you	IRD	RECEIVER
to these illustrations to determine where you
will install the SIRIUS/DBS Signal Splitter/
Combiner in your system.