RuggedCom RX1000, RX1100 manual Server Configuration

RuggedRouter™ User Guide

The “Apply Configuration” button restarts the server to activate any configuration changes that have been made, restarting VPN connections.

Figure 106: IPsec VPN Configuration After Connections Have Been Created

Server Configuration

Figure 107: Server Configuration

The Protocol Stack field configures whether route based or policy based VPNs are used. Following the link will take the user to menu that requests a reconfirmation and then changes the style of VPN.

The Network interfaces for IPsec table configures the association between ipsec interfaces and the real interfaces upon which they become available.

If the Default field is selected, Openswan will use its current default (Default route interface at the time of writing) to associate the named ipsec interface with.

If the Default route interface field is selected, Openswan will use the real interface owning the default route to associate the named ipsec interface with.

If the Default field is selected, Openswan will use its current default (Default route interface at the time of writing) to associate the named ipsec interface with.

If the Listed below.. field is selected, Openswan will establish the real to ipsec interfaces listed.

128 RuggedCom