RuggedRouter™ User Guide

IRIGB Configuration

Figure 189: IRIGB Configuration menu

This menu allow you to configure IRIGB parameters. The save button will save the changes of configuration permanently.

The AM Port 1 (PTP1) Output field enables or disables the amplitude modulated output of this port.

The TTL Port 2 (PTP2) Output and TTL Port 3 (PTP3) Output fields sets the output formats of these ports to PPS, PWM and OFF.

IEEE1588 Configuration

Figure 190: IEEE1588 Configuration Menu

This menu allows you to configure IEEE 1588 parameters.

The 1588 Working Mode field allows configures whether the router will be forced to 1588 slave mode or determine its role by the BMC algorithm.

The Preferred Master Clock field configures the router to be preferred master clock.

The Subdomain Name field allows you to choose which domain you want the router to participate in. There are four domains available, each mapped to a different multicast IP address.

The Sync Interval field configures the rate at which SYNC messages are issued.

The router NTP daemon uses GPS as a clock source when it is available and with IEE1588 when GPS is not available.

The Treat NTP sync'd grandmaster as stratum field assigns the stratum number when grandmaster clock synchronized with remote NTP server but not GPS.

The Treat Local Clock sync'd grandmaster as stratum field assigns the stratum number when grandmaster clock synchronized with local clock but not NTP server or GPS.

226

RuggedCom

Page 228
Image 228
RuggedCom RX1000, RX1100 manual Irigb Configuration, IEEE1588 Configuration