RuggedCom RX1100, RX1000 manual Editing a T3 Interface, Edit T3 Interface

Chapter 7 – Configuring Frame Relay/PPP And T3

Editing A T3 Interface

Figure 65: Edit T3 Interface

This menu allows you to display and configure T3 Trunk parameters.

The Framing field determines the framing format used. Your line provider will indicate the correct format.

The Line Decoding field reflects the line encoding/decoding scheme. Almost all T3s now use B3ZS.

The Clocking field selects whether to accept or provide clocks. In normal use the central office provides clocks and your setting should be “Normal”. You may also connect to another router by using a cross-over cable and selecting a “Master” clocking option on one of the two routers.

Editing A Logical Interface (Frame Relay)

Figure 66: Edit T1 Interface

This menu allows you to display and configure logical interface fields for Frame Relay. The menu is composed of two tables. The first table provides link based configuration, which affect all DLCIs. The second table provides configuration parameters for individual DLCIs.

After the first DLCI has been configured, revisiting that DLCI will display a menu that allows additional DLCIs to be configured.

RuggedCom 79