RuggedCom RX1100, RX1000 manual Restoring a Configuration, Selecting a configuration to reload

Chapter 1 – Setting Up And Administering The Router

Restoring A Configuration

The Restore A Previous Configuration command provides a means to restore a previously taken snapshot of the configuration of the router.

Note: The router will reboot immediately after restoring configuration.

The user is first prompted to select either the factory default configuration or a previously made archive.

Note: Restoring the factory defaults will reset IP addresses and may make the router impossible to reach from the network.

Figure 9: Selecting a configuration to reload

Initially, your RuggedRouter will have no previously saved configurations. The factory defaults will always be available.

Figure 10: Selecting a previously made configuration

Once a configuration is selected the archive will be restored. After the configuration is restored, the router will reboot immediately.

RuggedCom 33