RuggedRouter™ User Guide

SNMP V1 and V2 transmit information in clear text (which may or may not be an issue depending the facilities the data is transmitted over) and are lacking in the ability to authenticate a user. SNMP V3 adds strong authentication and encryption.

SNMP Configuration Main Menu

Figure 217: SNMP Main Configuration page

In order to enable snmpd (the snmp daemon) at each and every boot, use the System folder, Bootup And Shutdown menu.

Note: Prior to ROX 1.10.0, SNMP was manually configured used the com2sec, group, view and access directives. If so configured, the SNMP menu will prompt you to convert the configuration to one it can manage.

System Configuration

Figure 218: System Configuration page

The System name, System location, System contact, and System description fields configure descriptive parameters for the router.

Network Addressing Configuration

For reference, the set of currently configured and active IP addresses is listed near the the top of the page.

Figure 219: Network Addressing Configuration page, Client Address

248

RuggedCom

Page 250
Image 250
RuggedCom RX1000, RX1100 manual Snmp Configuration Main Menu, System Configuration, Network Addressing Configuration