Chapter 5 – Configuring Ethernet Interfaces

Ethernet

Figure 41: Ethernet Menu

This menu allows you to configure Ethernet interface parameters as well as display the routes and status of all network interfaces.

Select the Ethernet Interfaces icon to configure Ethernet interfaces.

The Network Interfaces menu lets you edit the permanent configuration of Ethernet interfaces, or simply try out changes. The Apply Configuration button serves to restore the permanently saved changes and restart Ethernet networking.

Ethernet Interfaces

Figure 42: Current and Boot Time Ethernet Configuration

This menu allows you to display and configure the Ethernet interfaces in the router.

The Current Configuration table allows you to try out changes on the existing interfaces before making permanent changes. Any changes made take effect immediately, but will not be present after the next boot. The entries in this table can also be used to temporarily disable or re-enable an interface.

The Boot Time Configuration table router allows you make changes to the “permanent” configuration of any interface.

RuggedCom

59

Page 61
Image 61
RuggedCom RX1100, RX1000 manual Ethernet Interfaces