Chapter 8 – Configuring Frame Relay/PPP And DDS

Naming Of Logical Interfaces

Webmin names the logical interfaces for you (but allows you to provide a description). All interfaces start with a “w” to identify them as wan interfaces, followed by the interface number. The next part of the identifier is either “ppp” or “fr” and the frame relay DLCI number.

Editing A Logical Interface (Frame Relay)

Figure 72: Edit Logical Interface (Frame Relay), single DLCI

This menu allows you to display and configure logical interface fields for Frame Relay. The menu is composed of two tables. The first table provides link based configuration, which affect all DLCIs. The second table provides configuration parameters for individual DLCIs.

After the first DLCI has been configured, revisiting that DLCI will display a menu that allows additional DLCIs to be configured.

Figure 73: Edit Logical Interface (Frame Relay), multiple DLCIs

The fields and buttons in this menu are the same as those described in the Editing A Logical Interface (Frame Relay) section of the Configuring Frame Relay/PPP And T1/E1 chapter.

RuggedCom

85

Page 87
Image 87
RuggedCom RX1100, RX1000 manual Edit Logical Interface Frame Relay, single Dlci