RuggedCom RX1000, RX1100 manual T3 Configuration, T3 Network Interfaces

RuggedRouter™ User Guide

T3 Configuration

Figure 62: T3 Trunks And Interfaces

This menu allows you to display and configure T3 Trunks as well as display the routes and status of the network interfaces.

T3 Network Interfaces

Figure 63: T3 Network Interfaces Initial Configuration

This menu allows you to display and configure T3 Trunk parameters. A table is presented for each interface.

Interface numbers are as described by the “WAN” labels as shown in the home page chassis diagram.

The status of the trunks physical and logical interfaces are shown This menu presents connection statuses but does not update them in real time. Click on the Refresh this page link to update to the current status.

The menu will change after assignment of a logical interface, providing links to logical interface and link statistics.

Figure 64: T3 Network Interfaces Initial Configuration

Naming Of Logical Interfaces

Webmin names the logical interfaces for you (but allows you to provide a description). All interfaces start with a “w” to identify them as wan interfaces, followed by the interface number. The next part of the identifier is either “ppp” or “fr” and the frame relay DLCI number.

78 RuggedCom