Chapter 20 – Configuring GOOSE Tunnels

This menu displays decoded GOOSE activity.

The desired traffic sources, number of messages and length of time to capture are entered and the Start Trace button is pressed. The menu will display up to the provided number of messages waiting up to the specified number of seconds.

The Trace on protocols: selections feature a (all to short) list of protocols with unused entries greyed out. The default is All Protocols.

The Message Decode field causes received/transmitted frame entries to include protocol specific information. If the Hex Dump field is selected, the first 64 bytes of packet content is displayed.

The Packets field causes received/transmitted packet entries to be displayed.

The RTT Measurement field displays Beacon messages used for RTT measurement.

Note: Specifying large numbers of ports, entries and capture times can result in a great deal of output. Specifying a large capture time may require the web page to wait that interval if activity is infrequent.

RuggedCom

199

Page 201
Image 201
RuggedCom RX1100, RX1000 manual