RuggedCom RX1100, RX1000 manual Viewing Vrrp Instances Status

Chapter 15 – Configuring VRRP

Viewing VRRP Instances Status

Figure 140: VRRP Instances Status

The VRRP Instances Status menu displays the current status of VRRP instances. This menu does not update status in real time. Click on the Refresh Display button to update to the current status.

The entries under the Instance column reflect the name of VRRP instances existing as of the last restart of keepalived.

The entries under the Current State column reflect the state VRRP instances. An instance can be in one of Master (master for the VRIP), Backup (backup for the VRIP) or Fault (VRRP interface or Monitored interface) is down.

The entries under the Time Of Change To Current State column reflect when the current state was entered.

The entries under the VRRP Interface State column reflect the link state of the interface that the instance runs upon.

The entries under the Monitored Interface State column reflect the link state of the monitored interface or “none” if an interface is not configured.

RuggedCom 167