Garmin G600 manual Selecting a New Chart by Airport, Press ENT to display the desired chart

3.5.3.2Selecting a New Chart by Airport

A chart for a different airport may be chosen by selecting the identifier for the desired airport.

Figure 3-125 Airport Identifier Selection

1)While viewing the Charts page of the FPL page group, press the SELECT soft key to change the airport.

2)Use the large MFD knob to move the cursor to highlight a character.

3)Use the small MFD knob to change the character.

4)Press ENT to accept the selected airport.

5)Use the large and small MFD knobs to select the desired chart.

6)Press ENT to display the desired chart.

7)With ChartView only and when available for the selected chart, more detail is available. Press the Detail key to view detailed views of the current chart. Press the Header, Plan, Profile, or Minimums keys to view detailed sections for the chart for those topics.

Foreword
System	Sec 1
PFD	Sec 2
Sec 3 MFD
Avoidance	Hazard	Sec 4
Features	Additional	Sec 5
& Alerts	Annun.	Sec 6
Symbols	Sec 7
Glossary	Sec 8
Appendix A
Index	Appendix
	B

190-00601-02 Rev. E Garmin G600 Pilot’s Guide 3-89