Garmin G600 manual Airways Selection

	Foreword
Sec 1	System
Sec 2	PFD
Sec 3 MFD

Airways

The Airways option allows you to select the airways that are shown on the Navigation Map. All, Low only, and Hi only Airways may be selected. When Off is selected, airways will not be shown.

Sec 4	Hazard	Avoidance
Sec 5	Additional	Features
Sec 6	Annun. & Alerts
	Sec 7	Symbols
	Sec 8	Glossary
		Appendix A
	Appendix B	Index

Figure 3-63 Airways Selection

1)While viewing the Navigation Map Setup page and the Aviation Group active, turn the large MFD knob to highlight the “Airways” option.

2)Turn the small MFD knob to change the highlighted value.

3)Press ENT to accept the displayed value. The next option will be highlighted.

4)Press the small MFD knob to cancel selection or to end editing and return to the Navigation Map page or turn the large MFD knob to the next option.

3-48 Garmin G600 Pilot’s Guide 190-00601-02 Rev. E