Garmin G600 manual Restricted Airspace Viewing Range

	Foreword
Sec 1	System
Sec 2	PFD
Sec 3 MFD

Restricted Airspace Viewing Range

The Restricted airspace viewing range option selects whether the map range is shown on the Navigation Map. Restricted airspace information will be shown at and below the selected map range. When Off is selected, the information will not be shown. In the example below where 200 NM is selected, Restricted airspace information will be shown at map ranges of 200 NM and lower.

Sec 4	Hazard	Avoidance
Sec 5	Additional	Features
Sec 6	Annun. & Alerts
	Sec 7	Symbols

Figure 3-59 Navigation Map Restricted Airspace Viewing Range Selection

1)While viewing the Navigation Map Setup page and the Aviation Group active, turn the large MFD knob to highlight the “Restricted Viewing Range” option.

2)Turn the small MFD knob to change the highlighted value.

Sec 8	Glossary
	Appendix A
Appendix B	Index

3)Press ENT to accept the displayed value. The next option will be highlighted.

4)Press the small MFD knob to cancel selection or to end editing and return to the Navigation Map page or turn the large MFD knob to the next option.

3-44 Garmin G600 Pilot’s Guide 190-00601-02 Rev. E