Garmin G600 manual Gfds Data Request Auto Request, Diameter/Route Width Gfds Data Request

Diameter/Route Width GFDS Data Request

1)After selecting a coverage option in the previous section, the Diameter/Route Width field will now be highlighted.

Figure 4-103 Waypoint GFDS Data Request Range

2)Turn the small MFD knob to select the desired Diameter/Route Width and then press ENT.

4.11.5.2GFDS Data Request Auto Request

1)Turn the large MFD knob to highlight “Auto Request - Update Rate.”

2)Turn the small MFD knob to select “Off” or an Update Rate. When finished selecting the Update Rate, press ENT. The Update Rate will default to “OFF” at each power cycle.

Figure 4-104 GFDS Data Request Auto Update Rate

Foreword
System	Sec 1
PFD	Sec 2
Sec 3 MFD
Sec 4 Hazard Avoidance
Features	Additional	Sec 5
& Alerts	Annun.	Sec 6
Symbols	Sec 7
Glossary	Sec 8
Appendix A
Index	Appendix
	B

190-00601-02 Rev. E Garmin G600 Pilot’s Guide 4-111