5.7.3.3Horizon Heading

The Horizon Heading is synchronized with the HSI and shows compass headings in 30-degree increments on the Zero-Pitch Line. Horizon heading tick marks and digits appearing on the zero-pitch line are not visible when they are behind either the airspeed or altitude display. Horizon Heading is activated and deactivated by pressing the HRZN HDG soft key.

Horizon Heading

Figure 5-37 Horizon Heading

5.7.3.4Airport Signs

Airports Signs provide a visual representation of airport location and identification on the synthetic terrain display. When activated, the signs appear on the display when the aircraft is approximately 15 NM from an airport and disappear at approximately 4.5 NM. Airport signs are shown without the identifier until the aircraft is approximately 9 NM from the airport. Airport signs are shown behind the airspeed or altitude display. Airport signs are activated and deactivated by pressing the APT SIGNS soft key.

Airport Sign without Identifier

Airport Sign with Identifier

(Between 9 NM and 15 NM)

(Between 4.5 NM and 9.0 NM)

 

 

 

 

 

 

 

 

 

Figure 5-38 Airport Signs

Foreword

 

 

System

Sec 1

 

PFD

Sec 2

 

Sec 3 MFD

 

Avoidance

Hazard

Sec 4

Sec 5 Additional Features

Annun. & Alerts

Sec 6

Symbols

Sec 7

 

Glossary

Sec 8

 

Appendix A

 

 

Index

Appendix

 

 

B

 

190-00601-02 Rev. E

Garmin G600 Pilot’s Guide

5-41

Page 327
Image 327
Garmin G600 manual Horizon Heading, Airport Signs