Garmin G600 manual Turn the small MFD knob to turn the function on or off, Nexrad Cell Movement

		Foreword
	Sec 1	System
	Sec 2	PFD
	Sec 3 MFD
Sec 4	Hazard Avoidance
Sec 5	Additional	Features
Sec 6	Annun. & Alerts
	Sec 7	Symbols
	Sec 8	Glossary
		Appendix A
	Appendix B	Index

NEXRAD Cell Movement

The NEXRAD Cell Movement option selects whether NEXRAD Cell Movement is shown on the Navigation Map. NEXRAD Cell Movement will be shown at and below the selected map range. When Off is selected, NEXRAD Cell Movement will not be shown. In the example below where 150 NM is selected, the NEXRAD Cell Movement will be shown at map ranges of 150 NM and lower.

Figure 3-46 NEXRAD Cell Movement Selection

1)While viewing the Navigation Map Setup page and the Weather Group active, turn the large MFD knob to highlight the “NEXRAD Cell Movement” option.

2)Turn the small MFD knob to turn the function on or off.

3)Press ENT to accept the displayed value. The next option will be highlighted.

4)Press the small MFD knob to cancel selection or to end editing and return to the Navigation Map page or turn the large MFD knob to the next option.

3-32 Garmin G600 Pilot’s Guide 190-00601-02 Rev. E