Foreword

Sec 1

System

Sec 2

PFD

Sec 3 MFD

Lightning Viewing Range

The Lightning Viewing Range option selects whether the Lightning weather products is shown on the Navigation Map. Lightning weather products will be shown at and below the selected map range. When Off is selected, Lightning weather will not be shown. In the figure below where 200 NM is selected, Lightning symbols will be shown at map ranges of 200 NM and lower.

Sec 4

Hazard

Avoidance

Sec 5

Additional

Features

Sec 6

Annun. & Alerts

 

Sec 7

Symbols

Figure 3-48 Lightning Viewing Range Selection

1)While viewing the Navigation Map Setup page and the Weather Group active, turn the large MFD knob to highlight the “Lightning Viewing Range” option.

2)Turn the small MFD knob to change the highlighted value.

3)Press ENT to accept the displayed value. The next option will be highlighted.

Sec 8

Glossary

 

Appendix A

Appendix B

Index

4)Press the small MFD knob to cancel selection or to end editing and return to the Navigation Map page or turn the large MFD knob to the next option.

3-34

Garmin G600 Pilot’s Guide

190-00601-02 Rev. E

Page 104
Image 104
Garmin G600 manual Lightning Viewing Range Selection