4)Acknowledge the Power-up Page agreement by pressing the ENT key or the right-most soft key. If a database is highlighted in yellow, it is either expired or the G600 can not determine the date.

Figure A-5 Database Information on the Splash Screen

5)Use the large MFD knob to select the AUX page group and then the small MFD knob to reach the System Status Page.

6)Press the DBASE soft key to place the cursor in the “Database” window.

7)Turn the small MFD knob to scroll through the list and check that all databases are current and there are no errors.

8)Power down the GDU 620.

A-6

Garmin G600 Pilot’s Guide

190-00601-02 Rev. E

Page 364
Image 364
Garmin G600 manual Figure A-5 Database Information on the Splash Screen