Garmin G600 manual Selecting a Chart by Identifier, Airport Identifier Selection

		Foreword
	Sec 1	System
	Sec 2	PFD
	Sec 3	MFD
Sec 4	Hazard	Avoidance
Sec 5	Additional	Features
Sec 6	Annun. & Alerts
	Sec 7	Symbols
	Sec 8	Glossary
		Appendix A
	Appendix B	Index

5.1.3Selecting a Chart by Identifier

A chart for a different airport may be chosen by selecting the identifier for the desired airport.

Airport Identifier Selection

Figure 5-6 Airport Identifier Selection

1)While viewing the Charts page of the FPL page group, press the SELECT soft key to change the airport.

2)Use the large MFD knob to move the cursor to highlight a character.

3)Use the small MFD knob to change the character.

4)Press ENT to accept the selected airport.

5-6 Garmin G600 Pilot’s Guide 190-00601-02 Rev. E