Foreword

Sec 1

System

Sec 2

PFD

Sec 3 MFD

Class C/TCA Airspace Viewing Range

The Class C/TCA airspace viewing range option selects whether Class C/TCA airspace information is shown on the Navigation Map. Class C/TCA airspace information will be shown at and below the selected map range. When Off is selected, the information will not be shown. In the example below where 200 NM is selected, Class C/TCA airspace information will be shown at map ranges of 200 NM and lower.

Sec 4

Hazard

Avoidance

Sec 5

Additional

Features

Sec 6

Annun. & Alerts

 

Sec 7

Symbols

 

Sec 8

Glossary

 

 

Appendix A

 

Appendix B

Index

Figure 3-57 Navigation Map Class C/TCA Viewing Range Selection

1)While viewing the Navigation Map Setup page and the Aviation Group active, turn the large MFD knob to highlight the “Class C/TCA Viewing Range” option.

2)Turn the small MFD knob to change the highlighted value.

3)Press ENT to accept the displayed value. The next option will be highlighted.

4)Press the small MFD knob to cancel selection or to end editing and return to the Navigation Map page or turn the large MFD knob to the next option.

3-42

Garmin G600 Pilot’s Guide

190-00601-02 Rev. E

Page 112
Image 112
Garmin G600 manual Class C/TCA Airspace Viewing Range, Navigation Map Class C/TCA Viewing Range Selection