Garmin G600 manual Selecting an XM Radio Channel, XM Channel Selection

5.5.3.2Selecting an XM® Radio Channel

The Channel feature is used to navigate through the channels in the selected category.

Active Channel Number

Artist Name

Category

Active Channel Name

Song Title

New Selected Channel

Figure 5-22 XM Channel Selection

1)While viewing the XM Radio page of the AUX page group, press the small MFD knob and then turn the small MFD knob to select the desired channel.

2)Press ENT to make the highlighted channel the Active Channel.

NOTE: A delay of several seconds may occur when selecting a channel. The listed title may end before the radio begins playing the current Active Channel material.

3)Press the small MFD knob to cancel selection or to end editing.

OR

4)Press CHNL and then the CH + or CH – soft keys to increment up or down one channel at a time in the active category.

OR

5)Press CHNL and then the DIR CH soft key to directly select a channel in the active category. Use the large and small MFD knobs to select desired channel.

Foreword
System	Sec 1
PFD	Sec 2
Sec 3 MFD
Avoidance	Hazard	Sec 4
Sec 5 Additional Features
Annun. & Alerts		Sec 6
Symbols	Sec 7
Glossary	Sec 8
Appendix A
Index	Appendix
	B

190-00601-02 Rev. E Garmin G600 Pilot’s Guide 5-27