Garmin G600 manual Barometric Minimums Source Selection

	Foreword
Sec 1	System
Sec 2	PFD

5.1.5.1Setting the Altitude Minimums Alerter

1)While viewing the Charts Page of the FPL page group, press the Menu key. With the Set Minimums item highlighted, press ENT.

2)With the Minimums Source highlighted, select the Altitude Minimums Alerter source with small MFD knob.

Figure 5-9 Barometric Minimums Source Selection

Sec 3 MFD

3)Turn the large MFD knob to highlight the Altitude Minimums value. Turn the large and small MFD knobs to change the Altitude Minimums value and then press ENT to activate the selected value.

Sec 4	Hazard	Avoidance
Sec 5	Additional	Features
Sec 6	Annun. & Alerts
	Sec 7	Symbols
	Sec 8	Glossary
		Appendix A
	Appendix B	Index

Figure 5-10 Barometric Minimums Altitude Selection

Alerting is inhibited while the aircraft is on the ground and until the aircraft reaches 150 feet above the MDA. The Minimum altitude will be available in the Altitude Alerter.

In dual installations, the minimums alerting altitude value may be set from either GDU 620 and will be synchronized on both units.

NOTE: If you highlight the Minimums Altitude field on the FPL page and press the CLR key, it will turn the minimums functionality off.

5-8 Garmin G600 Pilot’s Guide 190-00601-02 Rev. E