Garmin G600 manual Viewing Chart Details in ChartView

5.2.2Viewing Chart Details in ChartView

NOTE: The chart for the destination airport or loaded approach will automatically be selected.

NOTE: Chart details are only available for instrument approach procedure charts. Chart details are not available for airport diagrams or SID/STAR charts.

1)While viewing the Charts page of the FPL page group, press the SELECT soft key to activate chart selection.

2)Turn the large MFD knob to highlight the field to the right of the airport identifier.

3)Turn the small MFD knob to highlight the desired chart.

Foreword
System	Sec 1
PFD	Sec 2
Sec 3 MFD

Figure 5-12 Activate Chart Selection for the Current Airport (ChartView shown)

Avoidance	Hazard	Sec 4
Sec 5 Additional Features
Annun. & Alerts		Sec 6
Symbols	Sec 7
Glossary	Sec 8
Appendix A
Index	Appendix
	B

190-00601-02 Rev. E Garmin G600 Pilot’s Guide 5-13