Foreword

Sec 1

System

Sec 2

PFD

4)With the Mode value highlighted, turn the small MFD knob to select Auto or Manual and then press ENT.

Figure 3-69 Aux Mode Display Brightness Mode Selection

 

Sec 3 MFD

Sec 4

Hazard Avoidance

Sec 5

Additional

Features

Sec 6

Annun. & Alerts

 

Sec 7

Symbols

 

Sec 8

Glossary

 

 

Appendix A

 

Appendix B

Index

3.4.1.2Airspeed Reference Marks

The Best Glide, Vr, Vx, and Vy airspeed reference marks for the PFD are adjusted with this function. A marker will appear on the PFD Airspeed tape at the selected speed when the value is set to “On.” Default reference airspeeds are set during installation. When power is cycled, the values you set will be reset.

NOTE: When power is cycled, the Airspeed Reference values are reset. During preflight, the Airspeed Reference values should be checked and set appropriately for the current aircraft configuration and performance.

Figure 3-70 Airspeed References shown on PFD when activated

3-52

Garmin G600 Pilot’s Guide

190-00601-02 Rev. E

Page 122
Image 122
Garmin G600 manual Airspeed Reference Marks, Aux Mode Display Brightness Mode Selection