Garmin G600 manual Winds Aloft Data Viewing Range Selection

	Foreword
	Sec 1 System
	Sec 2 PFD
	Sec 3 MFD
Sec 4	Hazard Avoidance
Sec 5	Additional Features
Sec 6	Annun. & Alerts
	Sec 7 Symbols
	Sec 8 Glossary
	Appendix A
	Appendix B Index

Winds Aloft Data Viewing Range

The Winds Aloft Data Viewing Range option allows you to select the map range where at and below that value Winds Aloft weather products will appear on the selected MFD Wx Data Link Map page (1, 2, or 3). When Off is selected, Winds Aloft will not be shown. In the figure below where 150 NM is selected, Winds Aloft data will be shown at map ranges of 150 NM and lower.

Figure 4-63 Winds Aloft Data Viewing Range Selection

1)While viewing a WX Data Link Map page of the WX page group, press the MENU key to display the Page Menu Options. The cursor flashes on the “Weather Setup” option. Press ENT.

2)Turn the large MFD knob to highlight the Winds Aloft Data Viewing Range value.

3)Turn the small MFD knob to highlight the desired value. Press ENT to accept the displayed value. The next option will be highlighted.

4)Press the small MFD knob to cancel selection or to end editing and return to the Navigation Map page or turn the large MFD knob to the next option.

4-76 Garmin G600 Pilot’s Guide 190-00601-02 Rev. E