Foreword

 

Sec 1

System

 

Sec 2

PFD

 

Sec 3 MFD

Sec 4

Hazard Avoidance

Sec 5

Additional

Features

Sec 6

Annun. & Alerts

 

Sec 7

Symbols

 

Sec 8

Glossary

 

 

Appendix A

 

Appendix B

Index

3.4.1.4Synchronization (Dual Installations Only)

Dual GDU 620 units when connected in the aircraft may be set up to communicate and share information by “Crossfilling” or synchronizing information between the two units.

When Barometric Correction is synchronized, any changes to the Barometric Setting on either GDU will change it on both GDUs.

Crossfill synchronization for CDI and Baro Corrections are selected in Aux mode.

1)While viewing the first page of the AUX page group, press the small MFD knob and turn the large MFD knob to highlight “CDI” or “BARO” in the “Synchronization” box in both units.

Figure 3-72 Dual Unit Synchronization

2)Turn the small MFD knob to select “ON” or “OFF.”

3)Press ENT.

The following information is always synchronized between both GDU 620 units:

Selected Altitude

Selected Heading

Selected Course

Selected Vertical Speed

Airspeed Bug Values

Airspeed Color Band Values

System Pressure Units

System Temperature Units

3-54

Garmin G600 Pilot’s Guide

190-00601-02 Rev. E

Page 124
Image 124
Garmin G600 manual Synchronization Dual Installations Only, Turn the small MFD knob to select on or OFF Press ENT