Pulsar MX
Secure your installation power continuity
Anticipate needed maintenance actions thanks to automatically displayed warnings:
LCM warning details | Signification | |
|
| |
END OF WARRANTY | Get your product warranty extension by contacting MGE UPS SYSTEMS at www.mge- | |
SOON CONTACT MGE AT | ||
ups.com/lcm | ||
www.mgeups.com/lcm |
| |
|
| |
BATTERY CHECK |
| |
RECOMMENDED | Battery is approaching its reliability end of life. Risk of dramatically reduced | |
CONTACT MGE AT | backup time | |
www.mgeups.com/lcm |
| |
|
| |
TECHNICAL CHECK |
| |
RECOMMENDED | Wearing parts of your product must be checked | |
CONTACT MGE AT | ||
| ||
www.mgeups.com/lcm |
| |
|
| |
OPERATION LIMITS |
| |
REACHED. | One of the following parameters is close to the limit of your product: Autonomy, time with | |
CONTACT MGE AT | mains 2 out of tolerance, overloads load level in %, battery environment temperature | |
www.mgeups.com/lcm |
| |
|
|
Reset or disable LCM
In case of any LCM messages displayed:
◗For temporary reset: Press ESC for more than 3 seconds in the Status and Alarm screen, to temporarily cancel the alarm status. The alert will be repeated twice in 30 days.
◗For permanent reset: Press ENT for more than 3 seconds in the LCM warning screen, to permanently cancel this LCM event.
At any time:
To Disable all LCM messages select "disable all", in LCM menu with LCD navigation.
You will not be aware of any LCM events that can happen on the UPS if you disable all LCM messages.
6 — 2 | Life Cycle Monitoring (LCM) |
