Garmin G600 manual System Operation, Pilot Controls, PFD Knob

1.4System Operation

Foreword

NOTE: Refer to Section 6 for detailed descriptions of all alerts and annunciations.

Sec 1	System
Sec 2	PFD
Sec 3	MFD
Sec 4 Hazard	Avoidance

1.4.1Pilot Controls

The GDU 620 controls have been designed to simplify operation of the system and minimize workload and the time required to access functionality. Controls are located on the PFD and MFD bezels and are comprised of a PFD knob, MFD dual concentric knobs, bezel keys, and soft keys.

1.4.1.1PFD Knob

Turning the PFD knob adjusts the values for the mode selected by the PFD bezel keys, such as, Heading (HDG), Course (CRS), Altitude (ALT), Vertical Speed (V/S), and Barometric Setting (BARO). The values are shown in a window to the left of the HSI. Pressing the PFD knob reverts to the default value of the selected mode.

Sec 5	Additional	Features
Sec 6	Annun. & Alerts
	Sec 7	Symbols

Heading	Course	Altitude	Vertical Speed	Barometer
Mode	Mode	Mode	Mode	Mode

Figure 1-15 Selection Modes Adjusted with the PFD Knob

NOTE: After 10 seconds of inactivity in another mode, the PFD knob selected mode will revert to Heading mode.

Sec 8	Glossary
	Appendix A
Appendix B	Index

1.Press the desired PFD mode selection key (HDG, CRS, ALT, V/S, or BARO). A window will be displayed near the upper right corner of the HSI showing the current value for that mode.

2.Turn the PFD knob to select the desired value.

1-14 Garmin G600 Pilot’s Guide 190-00601-02 Rev. E