Garmin G600 manual Jeppesen Databases, Updating the Jeppesen Database

		Foreword
	Sec 1	System
	Sec 2	PFD
	Sec 3	MFD
Sec 4	Hazard	Avoidance
Sec 5	Additional	Features
Sec 6	Annun. & Alerts
	Sec 7	Symbols
	Sec 8	Glossary
		Appendix A
	Appendix B	Index

Jeppesen Databases

The aviation database is updated on a 28 day cycle. Aviation database updates are provided by Garmin and may be downloaded from the Garmin web site “fly.garmin.com” onto a Garmin provided Supplemental Datacard. Contact Garmin at fly.garmin.com for aviation database updates and update kits. The Aviation database is stored internally and the Datacard is only used to transfer the database into the unit.

The optional ChartView database is updated on a 14 day cycle. The ChartView database is provided directly from Jeppesen. ChartView is an optional feature that requires enablement by a Garmin dealer. Contact Jeppesen (www.jeppesen. com) for ChartView subscription and update information.

Updating the Jeppesen Database

1)With the G600 System OFF, insert the SD card containing the aviation database update into the upper card slot of the GDU 620 to be updated (label of SD card should face up).

2)Turn the G600 System ON.

3)Verify the correct update cycle is loaded during power-up. Press the ENT key to continue or the CLR key to cancel loading.

Figure A-1 Database Initialization Display

A-2 Garmin G600 Pilot’s Guide 190-00601-02 Rev. E