Garmin G600 manual Zoom, Panning, Setup

3.4.5.2Zoom

1)While viewing the External Video function, press the Up Rng Arrow key to increase the zoom up to 10x magnification. Zoom level is made through digital magnification.

2)Press the Down Rng Arrow key to decrease the zoom level down to a minimum of 1x.

3.4.5.3Panning

1)While viewing the External Video function, press the small MFD knob to activate panning.

2)Turn the small MFD knob clockwise to pan up (the map will move down).

3)Turn the small MFD knob counterclockwise to pan down (the map will move up).

4)Turn the large MFD knob clockwise to pan to the right (the map will move left).

5)Turn the large MFD knob counterclockwise to pan to the left (the map will move right).

6)Press the small MFD knob to exit panning.

3.4.5.4Setup

The display of each video source is set up individually.

1)While viewing the External Video page, press the soft key for the desired Video source (Video 1 or Video 2).

2)Press the Setup soft key.

3)The Current value for Brightness will be selected. Use the following directions for each value.

Figure 3-84 External Video Setup

4)After selecting the desired settings, press the small MFD knob or the Setup soft key to exit editing.

Foreword
System	Sec 1
PFD	Sec 2
Sec 3 MFD
Avoidance	Hazard	Sec 4
Features	Additional	Sec 5
& Alerts	Annun.	Sec 6
Symbols	Sec 7
Glossary	Sec 8
Appendix A
Index	Appendix
	B

190-00601-02 Rev. E Garmin G600 Pilot’s Guide 3-63