Garmin G600 manual Cycle Number and Revision

5.2.1Cycle Number and Revision

The ChartView database is revised every 14 days. Charts are still viewable during a period that extends from the cycle expiration date to the disables date. ChartView is disabled 70 days after the expiration date and is no longer available for viewing upon reaching the disable date. When turning on the GDU 620, the Power-up Page indicates any of nine different possible criteria for ChartView availability. See the table below for the various ChartView Power-up Page displays and the definition of each.

Power-up Page Display	Definition
	Blank Line. GDU 620 system is
	not configured for ChartView.
	Contact a Garmin-authorized
	service center for configuration.
	System is configured for
	ChartView but no chart
	database is installed. Contact
	Jeppesen for a ChartView
	database.
	Normal operation. ChartView
	database is valid and within
	current cycle.
	ChartView database is within
	1 week after expiration date. A
	new cycle is available for update.
	ChartView database is beyond 1
	week after expiration date, but
	still within the 70 day viewing
	period.
	ChartView database has timed
	out. Database is beyond 70 days
	after expiration date. ChartView
	database is no longer available
	for viewing.

Foreword
System	Sec 1
PFD	Sec 2
Sec 3 MFD
Avoidance	Hazard	Sec 4
Sec 5 Additional Features
Annun. & Alerts		Sec 6
Symbols	Sec 7
Glossary	Sec 8
Appendix A
Index	Appendix
	B

190-00601-02 Rev. E Garmin G600 Pilot’s Guide 5-11