Garmin G600 manual Navigation Map North Up At Orientation Range Selection

	Foreword
Sec 1	System
Sec 2	PFD

North Up At

The North Up At option allows you to select the map range where at and above the selected value the Map Orientation will automatically change to North Up. For example, with the 500 NM value selected in the figure below, when the map range of the MFD is 500 NM or more, the map orientation will automatically become North Up.

1)While viewing the Navigation Map 1 or 2 of the Map page group, press the MENU key. With “Map Setup” highlighted, press ENT. With the Map Group active, turn the large MFD knob to highlight the “North Up At” option.

2)Turn the small MFD knob to change the highlighted value.

	Sec 3 MFD
Sec 4	Hazard Avoidance
Sec 5	Additional	Features
Sec 6	Annun. & Alerts
	Sec 7	Symbols

Figure 3-18 Navigation Map “North Up At” Orientation Range Selection

Sec 8	Glossary
	Appendix A
Appendix B	Index

3)Press ENT to accept the displayed value. The next option will be highlighted.

4)Press the small MFD knob to cancel selection or to end editing and return to the Navigation Map page or turn the large MFD knob to the next option.

3-14 Garmin G600 Pilot’s Guide 190-00601-02 Rev. E