Garmin G600 manual Turn the small MFD knob to highlight the desired selection, Call Suppression

Foreword

Call Suppression controls calling when use of the Iridium phone system is allowed.

1)Turn the large MFD knob to reach the Aux page group. Turn the small MFD knob to reach the Iridium Phone page.

Sec 1	System
Sec 2	PFD
Sec 3 MFD
Sec 4 Hazard Avoidance

2) Press the small MFD knob to select the Call Suppression type.

Status	Description
Off	Call Suppression is turned off. Calls may be transmitted and
	received through the Iridium phone.
On	Call Suppression is turned on. The incoming call pop-up will not
	be shown. The call may still be answered on the phone page.
	Outgoing calls are not affected.
On During APR/	Call Suppression is turned on during Approach, Missed Approach,
MAPR/TERM	and Terminal operations. The incoming call pop-up will not
	be shown. The call may still be answered on the phone page.
	Outgoing calls are not affected.

Sec 5	Additional	Features
Sec 6	Annun. & Alerts
	Sec 7	Symbols
	Sec 8	Glossary
		Appendix A
	Appendix B	Index

Table 3-7 Call Suppression

3) Turn the small MFD knob to highlight the desired selection.

Figure 3-95 Select Call Suppression

4)Press the ENT key. Press the small MFD knob again to cancel the selection cursor.

3-70 Garmin G600 Pilot’s Guide 190-00601-02 Rev. E