2.8.2Temperature Display

The Outside Air Temperature (OAT) is displayed to the left of the HSI. The OAT can be displayed in ºF or ºC, which is configured in the Aux System Setup Page. The temperature is derived from the Temperature Probe on the aircraft. The displayed temperature is the Static Air Temperature reported by the Air Data Computer. This temperature value is corrected for ram air heating effects.

Figure 2-37 HSI Outside Air Temperature

2.8.3Wind Vectors

When selected, wind vector information is displayed in a window on the PFD to the left of the HSI. The Wind Vector style is configured in the Aux Mode System Setup page. While on the ground, the Wind Vector window will indicate “No Wind Data.”

Figure 2-38 Wind Vector with No Wind Data

Four styles are available as shown below.

Style 1

 

Style 2

 

Style 3

 

Style 4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 2-39 Wind Vector Style

Foreword

 

 

System

Sec 1

 

PFD

Sec 2

 

Sec 3 MFD

 

Avoidance

Hazard

Sec 4

Features

Additional

Sec 5

& Alerts

Annun.

Sec 6

Symbols

Sec 7

 

Glossary

Sec 8

 

Appendix A

 

 

Index

Appendix

 

 

B

 

190-00601-02 Rev. E

Garmin G600 Pilot’s Guide

2-29

Page 67
Image 67
Garmin G600 manual Temperature Display, Wind Vectors, Style