MFD PFD System Foreword

Sec 3 Sec 2 Sec 1

Winds Aloft Altitude

The Winds Aloft Altitude option allows you to select the altitude where Winds Aloft weather products will be shown on the selected MFD Wx Data Link Map page (1, 2, or 3). Altitude can be selected in 3000 foot increments from the surface up to 42,000 feet MSL.

Pressing the WIND DOWN or WIND UP soft keys steps down or up in the 3,000 foot increments. In the figure below where 6000 feet is selected, Winds Aloft data will be shown for winds reported at an altitude of 6000 feet.

Sec 4

Hazard

Avoidance

Sec 5

Additional

Features

Sec 6

Annun. & Alerts

 

Sec 7 Symbols

 

Sec 8 Glossary

 

 

Appendix A

 

Appendix B

Index

Figure 4-121 Winds Aloft Altitude Selection

1)While viewing a WX Data Link Map page of the WX page group, press the MENU key to display the Page Menu Options. Turn the large MFD knob to highlight the Weather Setup option and press ENT.

2)Turn the large MFD knob to highlight Winds Aloft Altitude Viewing Range.

3)Turn the small MFD knob to highlight the desired value. Press ENT to accept the displayed value. The next option will be highlighted.

4)Press the small MFD knob to cancel selection or to end editing and return to the WX page or turn the large MFD knob to the next option.

4-126

Garmin G600 Pilot’s Guide

190-00601-02 Rev. E

Page 286
Image 286
Garmin G600 manual Winds Aloft Altitude Selection