Foreword

 

System

Sec 1

Figure 4-83 Restore Calibrated Gain

OR

1)While viewing the Weather Radar page of the Wx page group, press the CONTROL soft key.

2)Press the GAIN CAL soft key to restore the calibrated gain value. Press the MFD knob again to accept the value and end editing.

4.10.6.5Sector Scan (GWX Radars Only)

Adjusting the Sector Scan reduces the scan angle from Full in increments of ±20°, ±40°, and ±60° in horizontal scanning. Sector scanning is not available for vertical scanning.

1)While viewing the Weather Radar page of the Wx page group, press the CONTROL soft key.

2)Press the BRG soft key to display the Bearing Line.

3)Turn the small MFD knob to place the Bearing Line in the desired position. The location of the Bearing Line will become the center point of the Sector Scan.

4)Turn the large MFD knob to place the cursor in the SECTOR SCAN field.

Figure 4-84 Sector Scan - Full

5) Turn the small MFD knob to select FULL, 60°, 40°, or 20° scan.

PFD

Sec 2

 

Sec 3 MFD

 

Sec 4 Hazard Avoidance

Features

Additional

Sec 5

& Alerts

Annun.

Sec 6

Symbols

Sec 7

 

Glossary

Sec 8

 

Appendix A

 

 

Index

Appendix

 

 

B

 

190-00601-02 Rev. E

Garmin G600 Pilot’s Guide

4-97

Page 257
Image 257
Garmin G600 manual Sector Scan GWX Radars Only, Turn the small MFD knob to select FULL, 60, 40, or 20 scan