Garmin G600 manual Turn the large MFD knob to highlight SIG/AIR Viewing Range

SIGMET/AIRMET Viewing Range

The SIGMET/AIRMET Viewing Range option allows you to select the map range where at and below that value SIGMET/AIRMET products will be shown on the selected MFD Wx Data Link Map page (1, 2, or 3). When Off is selected, SIGMET/AIRMET will not be shown. In the figure below where 300 NM is selected, SIGMET/AIRMET data will be shown at map ranges of 300 NM and lower.

Figure 4-115 GFDS SIG/AIR Viewing Range Selection

1)While viewing a WX Data Link Map page of the WX page group, press the MENU key to display the Page Menu Options. Turn the large MFD knob to highlight the Weather Setup option and press ENT.

2)Turn the large MFD knob to highlight SIG/AIR Viewing Range.

3)Turn the small MFD knob to highlight the desired value. Press ENT to accept the displayed value. The next option will be highlighted.

4)Press the small MFD knob to cancel selection or to end editing and return to the WX page or turn the large MFD knob to the next option.

Foreword
System	Sec 1
PFD	Sec 2
Sec 3 MFD
Sec 4 Hazard Avoidance
Features	Additional	Sec 5
& Alerts	Annun.	Sec 6
Symbols	Sec 7
Glossary	Sec 8
Appendix A
Index	Appendix
	B

190-00601-02 Rev. E Garmin G600 Pilot’s Guide 4-121